NANO-CLEAR NC 45

Nano-Clear® Coating (NC45) is the only industrial coating in the global marketplace to enhance, restore, and extend the service life of freshly coated (newly painted) and oxidized (previously painted) surfaces by 15+ years. Nano-Clear® (NC45) dramatically improves corrosion, Weathering, abrasion, scratching, chipping, marring, chemical, and UV resistance. Nano-Clear® is a one component (1K), humidity cured, highly cross-linked, polyurethane/polyurea hybrid, protective clear topcoat. Engineered using nano-structuring, Nano-Clear® penetrates deep into the microscopic pores, holidays, cracks, and defects of painted surfaces to form a chemical bond that will enhance, improve, and recover original color and gloss. Nano-Clear® Greatly improves surface hardness Increases the resistance to moisture and water permeation Provides long-term prevention of coating deterioration The high-performance levels of Nano-Clear® (NC45) reduces time & expenses related to the maintenance & management of assets. NC45 extends an asset’s service life, increases ROI, and provides a potentially higher resale value.  Nano-Clear® NC45 is manufactured using proprietary 3D nano- DENSITY structured polymers (not nano-particles) which results in extreme crosslink density.
Crosslink Density - Why Is It Important?
Most traditional polymers use linear chain molecular groups with
low crosslink density. NC45's high crosslink density results in the
multifunctional surface properties and vastly improves upon the
levels of performance that are achieved.
A tight-knit, crosslinked mesh also has low surface energy and
water repellency (hydrophobicity) which aids in the easy release of:
Ice
Dirt
Graffiti
Oil & grease
Soot
Brake dust
Concrete dust
 Numerous forms of environmental and biological surface fouling and contaminants 
SOLUTION
Freshly Painted Surfaces
Nano-Clear® has been engineered to be applied over “fresh” (uncured*) 2K epoxies and 2K polyurethane, as well as sanded powder coatings, fiberglass/gel coats and anodized
aluminum (to prevent filiform corrosion, etc.).
*Note - Fully cured coatings require sanding before the application of NC45 to allow chemical bonding to take place.
Previously Painted / Highly Oxidized Surfaces
Nano-Clear® is also engineered to be applied over “oxidized”
2K epoxies, 2K polyurethane and powder coatings, as well as fiberglass/gel-coats and anodized aluminum (to prevent filiform corrosion, etc.)